Description
Complete 1.0HP Impeller, Seal & Single Bearing Kit for Watkins 37334 Pump Systems
This comprehensive repair kit services Watkins Vendor Code 4081 pumps featuring Wavemaster 48 1.0HP motors. Kit includes impeller with 2 1/8″ Eye, 1/4″ Vane Width, and 3 7/8″ OD plus seal and one bearing.
Electrical Specifications: Wavemaster 48 1.0HP motors typically draw 7-8.0 Amps at high speed on 230V systems, or 11-12.0 Amps on 115V configurations. For 115-volt applications, expect approximately 11-12.0 Amps at high speed; 230-volt systems run around 8.0 Amps on high speed.
Important: Never install an oversized impeller attempting to increase spa power—this damages motors and causes overheating at high speed. Always reference amperage charts to verify correct horsepower rating.
Frame Identification: Distinguish between 48 and 56 Frame wet ends by measuring motor through-bolt spacing. The 48 Frame measures 3 5/8″ between bolts (5 3/16″ diagonal X pattern) with 1/4″ bolt heads. The 56 Frame measures 4 1/8″ between bolts (5 3/4″ diagonal) with 5/16″ bolt heads.
Vendor Code 4081
Compatible with Watkins part numbers 37334 and 71894. Designed specifically for XP2 model wet end configurations.
